5 Gal. Tournament Gray Recreational Surface Coating

Make it a home court advantage! Plush color recreational coatings are 100% acrylic, high performance, non-fading all weather color systems for use on pickleball, tennis and other recreational surfaces. Plush color will adhere to asphalt and suitable concrete surfaces (never before painted concrete must be properly prepped via acid etch and primed with PT-Primer X). There are three key functions that provide the foundation to Plush color’s coatings: playability, durability and vibrant, fade resistant colors. The entire Plush color line is acrylic based and low VOC making them easier to clean and easier on the environment. Note: If product is not available to order in your area that is due to nighttime temperatures. Product may not cure and/or track in late Fall and early Spring applications”,”highlights”:null,”collection”:null,”descriptiveAttributes”:[

Plush color is to be applied with a commercial grade rubber squeegee

Playability – outstanding performance is the key to the best playability assuring the player a consistent ball bounce and stability

Durability – our 100% acrylic binder is fortified with fibers assuring the highest quality surface and made to resist harsh weather conditions

Fade resistant colors – the color protection formulation guarantees a non-fading court, Colors are representations only as screen monitors may not reflect actual paint color

Application rate – coverage will depend upon the porosity of the surface to which the Plush color acrylic color system is applied the average coverage will be 300-400 sq. ft. per 5 gal. pail (0.07 gal./sq. yd.)

Drying time is 30 to 90 minutes under optimum conditions – humidity, surface temperature and ambient temperature will affect drying process

Plush color acrylic color should not be applied when ambient temperature is below 50°F or when surface temperature is above 140°F, Manufacturer will not cover warranties when applied in colder / off season temperatures (below 50 degrees F at night)

Do not apply in if rain in forecast within 24 hours, do not store in direct sunlight and do not let product freeze

Plush color acrylic color should be allowed to cure for 24 hours before courts are opened for use

Note: for Portland cement (concrete) applications surface must cure for a minimum of 30 days; after 30 days, new concrete must be acid etched with either phosphoric or muriatic acid. A coating of our 5.5 Gal PT-Primer X Urethane must be applied to surface before application of Plush recreational surfacing products

Prep: Surface should be thoroughly cleaned prior to coating; power wash surface to remove any peeling, algae stains, dirt, grease…then blow off; use plush patch binder kit for cracks and depressions post cleaning and prior to coating

It is recommended to apply a coat of Plush Acrylic Resurfacer prior to the color coats. The acrylic resurfacer helps level the court and promotes strong adhesion

Mix: See use and care manual for instructions. Plush color is ready-to-use. Open and mix all pails with a mechanical mixer prior to application

Do inbounds first; pour bead across width of court and using a squeegee overlap as you go back and forth across court

Two coats of color is required to achieve a long lasting rich color, Application of the final coat needs to be at one time

Coating is anti-slip, additional sand does not need to be added

Online price includes PaintCare fee in the following states: CA, CO, CT, DC, ME, MN, OR, RI, VT, WA

Application:Line Paint & Recreational Surfaces

Application Method:Squeegee

Base Material:Acrylic

Coating Product Category:Paint

Color Family:Gray

Color/Finish:Gray flat finish

Coverage Area (sq. ft):350

Dry to Touch (min.):90 min

Kit:No

Number per Package:1

Paint Key Features:Mildew Resistant,Waterproof

Paint Product Form:Liquid

Paint/Stain Clean Up:Soap & Water

Returnable:Non-Returnable

Sheen:Flat/Matte

Surface Material Use:Asphalt,Concrete

Time before recoating (hours):24

Transparency:Solid

Manufacturer Warranty:None

Container Size:5 Gallon